Air Compressor Info

Home > Air Compressor Info > Controller Introduction Video for the Pneumark Screw Compressor

Controller Introduction Video for the Pneumark
Screw Compressor

Controller Introduction Video for the Pneumark Screw Compressor

The video is a introduction to the Pneumark Inverter Air Compressors controller. This is an easy to use controller that allows operators to review and maintain their air compressor system

Main Screen

The main screen give the operator a overview of the air compressors status.
The Key Information on the centre of screen is the operating,

Pressure level of the air system,
Temperature of the inverter drive which can be set,
Frequency showing between 0 to 160 Hz,
Power showing between 0 – 22 Kw, and
Fan speed of the cooling fan in Hz.

The Bottom Bar shows the Run hours of the machine and the Load hours of the machine, and also the Status of the operating compressor at the current moment.

On the Right Of The Screen you have the Menu option to access further parameters to be controlled, a Reset and Load/Unload manual operation buttons, and also a simple Start and Stop button.

Air Compressor Parameter Applications.

The menu applications give the Pneumark service technicians and factory operators further options to view and activate parameters controlling the machine.

On pre-commission the parameters are preset by the Pneumark service technicians prior to install to fine tune the machines operational status for your factory. Then, ongoing our air technicians will manage the ideal operational settings as your factory grows and changes.

Air Compressor Parameter Applications.

These parameter are all password protected for the Pneumark service technicians. The parameters within these applications are pre-set by the Pneumark service technicians prior to install to fine tune the machines operational status for your factory.